CE ShapeExtruder
Posted on 26. Sep, 2007 by Jerzy Drozda Jr in After Effects
Extrude any vector based layer to give it a real 3D look inside After Effects. No more duplicating layers, no more expensive 3D software.
Click here to watch the video tutorial
I did it! I did it again! I solve the biggest mystery in history of After Effects. With my new CustomEffect called ShapeExtruder you can take any vector based layer (known as Shape Layers) and extrude it to give it a cool 3D look.
Great thing about this CustomEffect is that the extruded layer still behaves and reacts like any other 3D layer so you keep total control over it’s appearance, animation and other things. It casts shadows, you can parent it to a null, and do all that good stuff.
Above all other features… it consists only of one layer. I’m pretty proud of this one. Not only it can be textured, but it can also reflect the world around it. And because it still is a Shape Layer you can apply any Shape Layer modifiers (like Offset Paths, or Round Corners) to create a custom look.
This tutorial turned out to be pretty long, because there are so many things to cover in it, and there are still some things that I didn’t mention in the tutorial itself, so make sure to download the project file and take a closer look on how things are build and put together.
I hope this will turn out useful for all of you. I can’t argue that the best results comes from external 3D applications, but I think that most of the time you’ll be able to get away with my CustomEffect. It has all the benefits of the old techniques of extruding in After Effects, none of theirs flaws, and there are some extra features so make sure to check it out.
For installation instructions go to What CustomEffects are page.
Download: Tutorial project file (After Effects CS3)
Download: CE ShapeExtruder (After Effects CS3)
196 Responses to “CE ShapeExtruder”
Leave a Reply
Maltaannon recommends:
Mr T
26. Sep, 2007
This is again a freaking good tutorial. I need to get Cs3 Fast.
Your a genious!
Take some pills for your schizophrenia!
But i gess its not that bad, having george, espacialy when he’s better in AE, than yourself. :)
T.
Massimiliano
27. Sep, 2007
GREAT!
I’ve been waiting for something like this for soooo long time!!!
Many thanks for your great work!
Umair
27. Sep, 2007
Nice buddy….!!!
i really like this….
U r Great Buddy….
an request is here kindly put some premiere tutorials and set extensions effects is after effect…
see u soon buddyy…
;)
Umair
27. Sep, 2007
hey buddy can u share us ur work i means ur commercials i just want to see that and then i will be able to understand this one more…
ninguem
27. Sep, 2007
Hi there mate!
First off I really appreciate those things you´re doing with the CEs and the lovelly expressions…I guess you´re a bit of a genius on those issues and it helps clearing my mind a lot.
And I thank you for sharing them.
One thing only: I used the extrude on a shape and it worked fine but when the camera orbited around to its side (like exactly parallel to the shape) the shape becomes unextruded again. Did it happen to you? Is anything I did wrong? Is my PC possessed evil unestruding forces? Well…
Thanxxx again and I´ll be waitin´ for your reply and your next tutorial.
Say hi to george to.
Cheers.
Ahmed
27. Sep, 2007
Honestly, You definitely deserve to join the creative team of Adobe After Effects…
Thanx…
Andrew Kramer
28. Sep, 2007
Buy this guy a Beer!
Nice Job as always.
Nicolas Massart
28. Sep, 2007
Nice tutorial ! Great work ! I’ve got to update to CS3 now !
I knew Video Copilot but not yours ! Happy discovery !
Keep going !
vucheria
28. Sep, 2007
Veeeery nice!
You deserve a medal..and I’m not joking!
I watch also Andrew’s and Aahron’s tutorials..and I must say that all of you deserve a prize for sharing your knowlege and helping for free alot of people.
By the way..how do you become such an expressions expert in AE?
Can u recomend me some books or other stuff?
Franky
28. Sep, 2007
You should get money,respect and finally a lot of sleep for that.
George is much faster than you, take care of him :)
Maltaannon
28. Sep, 2007
Hey guys! Thanks a lot for the kind words. I’m constantly waiting for some interesting tutorial suggestions, and for some donations if you’d be so kind to click on the button right below the search area.
I have a long list of tutorials to come so be patient. If my plan doesn’t change the next one is going to be less technical and more visual, showing you how to create some great titles.
Theres also another CustomEffect coming soon to speed up your work and to make more things possible to do in AfterEffects.
Thanks again!
Cheers & happy AfterEffecting!
Craig T
29. Sep, 2007
Really cool Malt, keep it up ;)
Aretha DC
29. Sep, 2007
I think you are sooo freakin AWESOME! I saw the others tuts and they just dont do it for me after seeing yours. Thank you so much. you truly are a creative genius!
Eran Stern
30. Sep, 2007
Very nice technique, although 42 minutes tutorial, is a bit too long for my taste.
Maltaannon
30. Sep, 2007
Yeah… I know. This is what a guy named Antony Buonomo wrote on CreativeCow forums:
“Erm… your tutes are great but I’ve learnt to watch them when I’m not in a hurry!”
and this is what I wrote him back:
“well, since I’m not very fluent in english it’s sometimes hard for me to speak my mind, not to mention making a joke… and I like making jokes… so it’s that much harder for me to record a tutorial than it is to other native english speakers
besides, my tutorials are mostly technical, and they do not explain how to create certain visual effects. instead i try to focus on solving problems, and finding better, faster, and more flexible ways of doing things.
therefore i have all kinds of people watching my tutorials: starting from the newbies and ending on the full time professionals. that makes it hard to find the balance between going into detail on every click and skipping the obvious stuff to cut the length of the tutorial”
But I do have a plan how to cut the length of my tutorials, and I’ll try to try it out recording the next one, so stay tuned.
Some great tutes are coming your way soon.
Anyway… I think that this tutorial was worth it, if you consider spending a lot of money on Zaxwerks plugin or such in comparison to spending 42 minutes watching this tutorial, right?
Cheers
sammiep
30. Sep, 2007
Youu are Great !! Whieee Hoeee make more Tutorials !!
Greetz
Tim Clapham
01. Oct, 2007
This looks very useful. Thank you for sharing this with the rest of us mortals.
Tim
Jacob
01. Oct, 2007
Wow this is really awesome! I am having problems using it though.. I put it on my text and it says “missing:” before the plugin name, but I have it installed and I’m using CS3.. Any idea why?
Massimiliano
01. Oct, 2007
“when the camera orbited around to its side (like exactly parallel to the shape) the shape becomes unextruded again”
The same happens to me :(
How can we use this with illustrator files? Thanks :)
Dave DuBois
01. Oct, 2007
Great tutorial… as always! Keep it up.
Mr. Kramer – If I’m ever in his neck of the woods I’ll buy him a beer!
Dave
Maltaannon
01. Oct, 2007
Camera orbiting is an issue with AE, not the preset itself. There is no way to solve it at this moment. But I’m constantly thinking about it.
As for Illustrator files… there’s an issue with Shape Layers. They don’t really work the way they should when using it with Illustrator. I’m working on some script to make it work like it should. But hopefully AE developers will answer my email some day and we’ll do some fixes together.
If someone has troubles installing the preset on PC or Mac, make sure to check out the “What CustomEffects are” page that can be find in the menu on the right hand side of the site. And if for some reason you don’t get it installed, don’t worry. Even if it says “Missing” it will still work. Clever, huh?
Cheers mates!
bisi
01. Oct, 2007
hello – thanks for this great 3d tutorial – i have one question maybe dumb , how create outlines from object imported from illustrator ? thanks
Maltaannon
01. Oct, 2007
like I’ve explained before… it’s not that easy. paths just don’t behave like they should when being copied from Illustrator to AE. I’m working on it.
bisi
02. Oct, 2007
maybe with puppet tool ?
FORTUNATO
02. Oct, 2007
First I would like to thank you for providing these helpful tools and information. Second I would like to express my concern with the render times involved with the CE Shape Extruder. It is taking far too long to render for me to consider using this Effect Preset. Thanks
asdf
02. Oct, 2007
what is the point of having a tutorial for your plugins if you can’t download the mac version? ???
Maltaannon
02. Oct, 2007
There is a Mac version. There are instructions on how to install any CustomEffect on Mac on the page called “What CustomEffects are”.
As for render times… well… it depends on your machine, like everything. Besides you can always turn the extrusion off while you’re animating, and then turn it on on the final render just like you’d do with proxies.
Roggy
18. Oct, 2007
really funny tut! please, maltaannon, do your future tutorial movies always in the early morning – without any sleep. and please do not prepare, never, its really funny to hear you improvise… foget casper or what was his name. you gave me some real unexpected laughters, loud! go on that way – i like it!!
R.
by the way your 3d-extruding thing is as bright as we are used from your tuts – go on genius!!!
Maltaannon
18. Oct, 2007
Thats a promise. Next tutorial will be totally live. No editing. Prepare for a loooong one.
nonsm0ker
19. Oct, 2007
I’m sorry, but there is NO *.xml file in the package(windows). What should I do? Please help, I just can’t wait to try this magic!:)
nonsm0ker
20. Oct, 2007
dumb peace of ass I am:) I’ve found the files.
Guys, It is very exciting technique, But really, how to get outlines for eps files?
Maltaannon
20. Oct, 2007
you need to open the eps file in Illustrator and copy&paste each path to the shape layer
Rick
22. Oct, 2007
Awesome! Only I can’t find the after effects presets xml file to paste your xml file into for the mac. Please help!
Maltaannon
22. Oct, 2007
It’s in the zip file. If you’re on PC that I recommend using my installer. More details here: http://maltaannon.com/what-customeffects-are/
Rick
22. Oct, 2007
Nevermind, I found your What CustomEffects Are. Thanks!
CR Chis
25. Oct, 2007
Hi.
Very good tutorials. just one question. I try to make a reflection on the “floor” with the 3d text made with the ShapeExtruder. How to make that, with a 2d layer is simple but I try to do the same process wiyh the 3d shape layer and something is wrong.
Thanks.
I´m a begginer user of After Effects.
Frank Wei
07. Nov, 2007
Thanks for shareing your knowledge. But I still met a problem when trying the custom effect out:
***********************
undefined value used in expression. Could be an out of range array subscript?
Error occured at line 0.
Comp: ‘Awesome3D’
Layer: 5(‘Awesome3D Outlines’)
Property: Reference Point
The error window always popup when I try to add the 3dshapeextruder onto the outline layer(or just open your sample project file).
Do you have any idea about what may cause the problem? I use AE CS3 and successfully install the .polyce file with pscei.
Thank you for everything again!
Maltaannon
07. Nov, 2007
Strange… I remember that I saw that error once, but I can’t remember what was causing it. What language version of AE are you using?
Frank Wei
12. Nov, 2007
English version. Could it caused by system compability?
Maltaannon
12. Nov, 2007
I don’t think so, but its hard for me to guess whats wrong. When I open my file than it works. Do you have a Professional version of After Effects?
Frank Wei
14. Nov, 2007
Yes. AE CS3 pro 8.0.0.247. Yesterday I installed AE in Vista and the same thing happened again(I once use winxp).
Frank Wei
14. Nov, 2007
BTW what version do you use? I wonder if this custom effect works on lower version, cs2 for example?
Maltaannon
14. Nov, 2007
It only works on CS3 as explained in the tutorial.
Pawel
27. Nov, 2007
Spoko preset! Bardzo przydatny!
I’ve always been using Zaxwerk’s Invigorator – even for simle title sequences but your stuff will definitely come in handy and it’ll cut down on the time I spend on my 3d titles.
Thank you
Maltaannon
27. Nov, 2007
Cała przyjemność po mojej stronie!
Thanks dude!
Thomas
29. Nov, 2007
Hi,
just one question.
did i something wrong with the installation of CeSe, because if Text or Shapes are turned 90 degrees toward camera, they become Flat.
Same things happen if i download your project.
So if i crate a orbiting camera around the Text i have not fully 3D. Is this a limitation?
Otherwise this is Awesome anyays!
Keep up!
Maltaannon
30. Nov, 2007
It is a limitation. And it has been answered in the comments several times. And lets be honest… how often do you need to orbit 90deg’s? Whats interesting in the side of the text? I’ll tell you this… I’ve build this for myself and I’m using it all the time, and I’m not missing text sides one bit.
I hope you will find it useful anyway.
Cheers
Thomas
30. Nov, 2007
Hi,
i’m very sorry. i did not red the whole thread. thats ok for me, i just wanted to be shure.
i’m just missing it because i have arranged a typo like a building and the camera simulates a helicopter flying around it. thats why. but don’t worry about it. i,m happy with it.
i really hope that you’ll get part of the adobe team one day and make this software even better.
Thank you J.D.
Maltaannon
30. Nov, 2007
Hm…. JD… I like the sound of that.
Joe
30. Nov, 2007
For those who can’t past proper paths into shape layers, you can paste paths from Illustrator by starting a path with the pen tool on a shape layer and then immediately pasting the path in. For some reason, just pasting a path into an empty path in a shape layer doesn’t work.
Thomas
01. Dec, 2007
yeh, the AE J(e)D(i) you are my son…
and “George” (Lucas:)
btw. thanks Joe for that path accomplshment.
aztecmonkey
03. Dec, 2007
I came across this jsx script on redefinery.com that converts masks to shape objects: http://www.redefinery.com/ae/view.php?item=rd_MasksToShapes
So first, place the jsx file in the scripts folder, then
* Open Illustrator
* Select the shape you want, and copy it
* Create a solid layer in AE
* Paste, and the layer is given a multitude of masks
* Make sure your solid layer is selected
* Go to File->Scripts->rd_MasksToShapes.jsx
* Voils!
Maltaannon
03. Dec, 2007
Hey! Thanks for the tip. I’ll check it out for sure. I was planning to make my own script, but since someone already have I’ll surely give it a try. Thanks again.
ChillOutMalt
04. Dec, 2007
Malt, you have some great tutorials and killer presets but for fuck’s sake man, get over yourself. You clearly love the sound of your own voice WAY too much. Get to the fucking point! You manage to make a 2min tutorial last half an hour. Who pays for your bandwidth anyway?
DuctTape
04. Dec, 2007
Yo Boss, appreciate your help. But it’d help a lot more if you could duct tape your trap and speed up the tutes :)
Maltaannon
04. Dec, 2007
Yeah yeah… I know I know. This was a hard one like I believe I’ve explained in the tutorial. I was recording this for several days. It is what it is. Take it or leave it. Newer ones are shorter. Besides, I have a cool idea on how to make the tutorials shorter. I’ll try in out with next one. Cheers
BlazingBeam
05. Dec, 2007
Hey Maltaannon,
This is an awesome tutorial! One question though, (I’m probably just missing something simple) is there any easy way to change the text and the extrusion to different words because when I change the source text, the extrusion is still the old word. ex. Awesome 3D to Ucoeadlkfje Idfsaw (the source text is Ucoeadlkfje Idfsaw, but the extrusion is still Awesome 3D. I am a complete noob so any help would um… help.
Thanks :)
Maltaannon
05. Dec, 2007
See… it doesn’t work that way. Then you change the source text it does not change the extrusion, because extrusion is not a text layer anymore. It’s a shape layer. So if you want to change the text you have to create a new shape layer.
Israel
05. Dec, 2007
Hi, I really can’t get this working on a shape. Pretty confused about why. Can’t create outlines from a jpeg – do I have to go through illustrator first? A quick step by step for that would be GREAT.
Maltaannon
05. Dec, 2007
The idea is Vector Graphics, so you need to have paths. I found that many question has been asked about this CustomEffect. As a response to that I’m planning a case study on using CE ShapeExtruder. If I’m lucky maybe I’ll get to record it tonight. Be patient. It’s coming. Soon.
BlazingBeam
06. Dec, 2007
Oh, I was just wondering if there was an easier way than having to apply all the effects onto the new outline again. Copying and Pasting didn’t seem to work very well. Again, I am a beginner and am probably just missing something. Also, could you recommend any beginner tutorials that are not too easy (like telling me how to make a new solid by going to Layer>New…) and cover the most important parts of After Effects?
Maltaannon
06. Dec, 2007
Sure. You may try my friends tutorials – Aharon Rabinowitz podcast at CreativeCow.net, and Andrew Kramer’s tutorials at VideoCopilot.net.
BlazingBeam
07. Dec, 2007
Thanks man! You’re awesome!
AE_wannabe
08. Dec, 2007
Malt, gotta personally thank you for all your time, help and effort. Good going man and hoping for more tutes in future.
Jimmy
12. Dec, 2007
I’m just loving this tutorial.. RESPECT! And again, 42 minutes.. Don’t mind about that.. Even if they took more than 1 hour I’ld still be extremely happy. Learning these new techniques completely free of charge! We have no right to complain.. Looking forward to giving it a real try! Andrew and Aharon, watch out.. a new star ‘Maltaannon’ seems to be born!
aztecmonkey
12. Dec, 2007
You know, the problem of viewing the 3dShapeExtruder object at a 90 deg angle can be solved by ramping up the depth as the camera approaches the 90° mark. I’m sure that there is a way to do it mathematically through expressions, calculating the angle created by the the camera position, its point of interest and the x axis of the 3dSE object, but that would require re-learning geometry and I don’t have the time right now.
In any case, I think this tutorial is extremely helpful and I am in the process of utilizing it in a campaign of TV spots to run in the spring.
Thank you, maltaannon!
Neokidd
15. Dec, 2007
wonderful
thanks alot for sharing this
posix
15. Dec, 2007
as much as i agree with everyone about how awesome this solution is, how clever and interesting maltannon’s solutions are, as happy as i am that this thing is free …
… for the love of god, don’t ever stay up until 5am again recording a tutorial. looking up how to spell “awesome” ?! err …
please put more efforts into organising yourself and your tutorials. it’s the only thing aharon has that you don’t have.
now if that isn’t a proper motivation ;)
when i first watched this, i stopped, downloaded the video, made into an avs to frameserve it so i could seek and skip through it.
effectively, this could’ve been 8-10mins long.
don’t get me wrong, i don’t want to complain or bitch, i mean we all know you’re awesome, but consider not making it that painful to watch things …
sheathe
20. Dec, 2007
Hi Jerzy – I tried downloading your CE ShapExtruder from the link at the top of this page but I keep getting redirected to this page without it downloading… can you please double-check the link? (or let me know if I’m going blind?)
Thanks!
sheathe
20. Dec, 2007
Hi again – False alarm… I’m not sure what happened but reloading the page seemed to fix the issue with the link.
Thanks for all your work!
costa
20. Dec, 2007
hy,and thanks for all your shares.
it seems that the download is not working, the link is this same page.
POSter
21. Dec, 2007
POS
vijayakumar
26. Dec, 2007
nice guid send me more details pls
groundloop
27. Dec, 2007
First of all great work. Looks fantastic. Install of preset went smooth (2 easy steps) but then ae give me a “absent” message in front of the fx name in the fx palette, and altough i followed the tutorial steps i get no extrusion… ? and what about the CEShapeExtruder.polyCE found in package should it go into the plugin folder or ???
tx much
Maltaannon
27. Dec, 2007
Hm… Sorry, but I dont really know what you’re talking about… that “absent” message thing. And polyCE doesn’t need to be in the folder.
groundloop
27. Dec, 2007
Tx found the solution on a french forum. Apparently, the absent label appears if the preset doesn’t belong to a preset catgory ‘like Backgrounds behavoirs etc… I will keep exploring your tutorials. Keep on the good work and tx.
sheathe
28. Dec, 2007
I really appreciate your efforts and sharing your work and presets. I was just wondering whether you might reconsider about encrypting your expressions since it kind of defeats the purpose of trying to allow people to learn. Thanks again!
Andreas
30. Dec, 2007
Your Video-Tutorial are so helpful for me. Just said thx via PayPal!
Vivek
08. Jan, 2008
This is excellent! However, where can I download the 3D Camera effects file for installation from?
Maltaannon
08. Jan, 2008
Dude! Please! You got this far – I mean to the comment area, and you didn’t even take time to check what’s right on this site. If you’re reading this scroll all the way up to the top of the page where it says “Download: CE_ShapeExtruder (After Effects CS3)”. And please don’t spam the same question in other posts.
Vivek
16. Jan, 2008
Thanks but what I had enquired was your “3D camera Lighting” effect, which is not included in your downloadable zip file…
Maltaannon
16. Jan, 2008
huh?
hoka
20. Jan, 2008
we need polygon studio where we can find it please
Maltaannon
20. Jan, 2008
What do you mean? If you need to contact me directly use the contact form on the right hand side in the menu.
maxjix
21. Jan, 2008
Thanks for shareing your knowledge. But I still met a problem when trying the custom effect out:
***********************
undefined value used in expression. Could be an out of range array subscript?
Error occured at line 0.
Comp: ‘Awesome3D’
Layer: 5(’Awesome3D Outlines’)
Property: Reference Point
The error window always popup when I try to add the 3dshapeextruder onto the outline layer(or just open your sample project file).
Do you have any idea about what may cause the problem? I use AE CS3 and successfully install the .polyce file with pscei.
Thank you for everything again!
maxjix
21. Jan, 2008
my cs3 folder D:\Program Files\Adobe\Adobe After Effects CS3\Support Files\Presets\ceshapeextruder
and and i installed .xml by pscei.exe but error
Maltaannon
21. Jan, 2008
Sorry my friend. I’ve noticed some other people experiencing the same error, but I was unable to determine what is wrong. I’ve tried different machines, different systems and different AE installations… all worked fine. Maybe you should try a manual installation?
Moi,Carole
23. Jan, 2008
Hi, there,
the error caused in AE CS3 might be due to the version of Windows XP that you installed, coz i tried installing ur custom effet in English version and Chinese veresion of XP, it ends up with one result that only English versino XP can make custom effect fully functional in both Chinese or English texts
Again, thanks for this preset, i think its great.
Martin
23. Jan, 2008
I also have the same error message but i had fix that in my machine… I am a user in HK, and I have change the “language for non-unicode program” from chinese to US in the regional and language option and now works!!!
Time to check out the cool stuff..
Davib
11. Feb, 2008
Maltaannon you are the best. i really love your tutorials, length, style, info, eveerything. keep up the great stuff. thanks alot!
oleg
19. Feb, 2008
Very,Veeeery nice.
candy
21. Feb, 2008
我下载下来了，可用的时候老是出错，不知道为什么？需要什么特别的插件吗？
need ping-s?
vinoth
06. Mar, 2008
Thanks, very nice.
Tracy
07. Mar, 2008
I laughed my ass off about the macaroni and cheese. With the stuff you are giving away, you can tell us how long it took for it to pass through your intestines, too!
W
15. Mar, 2008
Love the shape extruder and cant complain about it. However i cant seem to get it to work on shapes. I know this problem has come up before with others. Im just learning AE, i came from Avid and i learned everything I know from your tutorials. So please be forgiving when i ask the question: How can i create outlines on a shape? Text works fine, but when i go to create outlines with the shape it is blacked out.
Anyhow, thanks a million for all the tutorials and once i start making money off of this, i will definatly make a donation (all of this software…im broke!:D) Please keep the tutorials coming!!!! Once i reach the drinking age, i’ll buy you a beer.
Roger
24. Mar, 2008
Thanks, really! I like the personality that shines through. Like some have said before – no complaints when it is free!
Will Devine
04. Apr, 2008
Hi Matt,
Thanks for your Tutorials. It’s people like you and Andrew Cramer that make the Multimedia community Strong.
I don’t know if you sorted out the problem you were having with the extrude disapearing when the camera is paralel with the layers. I presume this is because the layers are all flat. I was thinking though this may be solved by adding two more layers into the middle of the extrude at angles, one at 45 degrees on the x axis one at 45 degrees on the y axis, but stretch them to the width of the originals and then colour overlay them the same as the extrude.
Anyway great job.
Maltaannon
04. Apr, 2008
That would be one way of doing it, but it also defeats the purpose of the 3DShapeExtruder on its own – which always was making 3D layers from a single layer.
hermanator
04. Apr, 2008
Maybe I’m dumb, but I cannot locate the javascript file js_MaskstoShapes.jsx anywhere?
Clues please!!
Maltaannon
04. Apr, 2008
Wrong post dude :) Here it is: http://maltaannon.com/after-effects/studying-ce-shapeextruder/
hermanator
04. Apr, 2008
I am dumb!!!
Thank You for the reality check.
Antonyb
01. May, 2008
Hey Maltaannon, thanks for the cool toys and tutes. I’m playing with the 3Dextruder at the moment – is there a way to use a bitmap or another layer as the front face?
Cheers
Maltaannon
01. May, 2008
Sure. Check this tutorial out and read the post: http://maltaannon.com/after-effects/studying-ce-shapeextruder/
daniel
05. May, 2008
This is so sweet :)
Kion'go
11. May, 2008
Is there a script for AE7
Maltaannon
11. May, 2008
No. As explained ShapeExtruder works with Shape Layers that are not available for AE7
TGD
26. May, 2008
[...] Extrude any vector based layer to give it a real 3D look inside After Effects. No more duplicating layers, no more expensive 3D software. (more… [...]
apolllo
04. Jun, 2008
hi. good.我下载下来了，可用的时候老是出错，不知道为什么？需要什么特别的插件吗？
Maltaannon
04. Jun, 2008
这一工程不仅在cs3 。您需要下载安装的应用。这里是指示http://maltaannon.com/what-customeffects-are/
Joey
14. Jun, 2008
Awesome tutorial!
frankie
19. Jun, 2008
hi everyone > the extruder is really awesome but i have a probleme to solve.i have installed the ce shape extruder usigng the pscei.exe ( draggin in to the icon) > i find the shape extruder in a folder named “polygonstudio” into the preset of AECs3.i try to download the tutorial ( project) and it works changing the parameters but if i try to cancel the effect the Ae tell me about an error .. like no effect called ce shape extruder find .if i put a new text and drag the the ce shape extruder and change the parameter i dont see it working (no 3d) > nothing happens
OOPs > what i have to do ??
frankie
19. Jun, 2008
ok > i try to cancel the folder named polygon studio into the preset folder of AECs3 i open the tutorial project > i dont see the folder named “polyton studio” and obviously the ce shape extruder but the 3d text changing parameter work the same (!?) > and like before cancelling the polygon folder when i try to cancel the effect in the layer Ae tell me that no effect is find and errors on properties like scale , rotations ecc (all the properties of the effect)
frankie
19. Jun, 2008
i read trough the forum > it seams that .. is it a problem of the language in whic is installed windows xp for me too?!
Jared Wineera
20. Jun, 2008
G’day,
Love your work … be prepared for a billion hits since Andrew Kramer mentioned this in his blog:) I’d love to donate but I’m a broke student with dust in my pockets …
Cheers,
Jaz.
Danny
29. Jun, 2008
***undefined value used in expression. Could be an out of range array subscript?
Error occured at line 0.
Comp: ‘Awesome3D’
Layer: 5(’Awesome3D Outlines’)
Property: Reference Point***
I get this error too, however, if you hit “U” and open up all expressions and edit out the Disclaimer bits and pieces, eg. http://www.maltannon.com and things. It works.
Is there a way that I can edit the script so that the disclaimer remains off?
thanks a lot for this.
Maltaannon
29. Jun, 2008
Hm…. Now that is odd.
priscilla
02. Jul, 2008
I have a question the logo example shows one object being extruded but what if i chose to reuse this lug in many times in one comp… like let’s say 10+, 20+ even 30+ how would this affect the refresh/preview rate in AE? Would it chug too much? or at all? would it crash? I’m basically trying to see if I can extrude various rectangles/squares into buildings and fly through them in my comp with a 3d cam… i don’t know how well it would work, i have ae7 for now and was going to upgrade to cs3 because of this plug in… but i’d like to know if anyone has had any experience in using this plug in the way i’d like to.
thx!
AndrewE
07. Jul, 2008
Has anyone got this working for the Macintosh?
I’m having a rather difficult time trying to find the .xml file to paste into.
Any insight would be greatly appreciated!
Thank you for your time!
Maverick
08. Jul, 2008
Do you have a version of this for Mac? thank you.
JC
20. Jul, 2008
I download the only version provide and installed in my Mac, however, only see the preset but don’t have any effect !
Please help !!
Maltaannon
20. Jul, 2008
It is a preset. Please read the informations provided on the website. Read the article, read the comments, read What CustomEffects are page – http://maltaannon.com/what-customeffects-are/
JC
21. Jul, 2008
Hi
I read the install instruction already before the installation, I ‘ve found that problem so post here
thanks
zhaocge
26. Jul, 2008
YES！I LIKE IT！！I come from china.I use AE CS3,Download your presets,In accordance with the above tips to install CUSTOMEFFECTS,Always unsuccessful….
CS3 Tips:”Undefined value used in expression.Could be an rang array subscript? Expression disabled.”
Oh~~My God!!Help me plzzzzzzz~~
Sorry,My poor English….谢谢您了，帮一下我吧.
And LINK：http://maltaannon.com/what-customeffects-are/#comment-2662
Johno
28. Jul, 2008
thank you so much for this! i’ve been going crazy trying to find a way to do this effectively while not being able to afford to buy a plugin. i honestly appreciate all the work you do and what you are doing for the community.
and i didn’t read all the comments but i did see a few were people on osx. i’m using a 2008 mac pro and the extruder worked great on my machine.
zhouzhi
29. Jul, 2008
who can tell ma how to change the “language for non-unicode program” from chinese to US in the regional and language
CristalCube
05. Aug, 2008
Spectacular!!
Thanks for this tutorial George, i mean… Mr. Maltaannon, can i call you George??
Anyway great tutorial, keep it going!!
Cheers.CC³.
Maltaannon
05. Aug, 2008
George is my evil alter ego, my evil twin. But sure. If you want to deal with George instead of with me – you can call me George. I’m glad you liked the tutorial.
Pwnzoid
06. Aug, 2008
How do I put the files from the links into the after effects. I put them into the plug-ins folder, but it’s not considered a plug-in >.<
I hate beeing a noob.
Umer
07. Aug, 2008
great work maltaannon. i just have one question . is there a way we can extrude along a path. for example if we want to show an extruded star trail so very popular in vector graphics these days.
i will hugely hugely appreciate if you can provide with some solution. keep up the good work. bye.
Maltaannon
07. Aug, 2008
you can do that with ShapeExtruder, but you cant define your own path, but you can band the extrusion. I showed how to do that in the tutorial.
Pwnzoid
07. Aug, 2008
Ehh, How exactly do you get it to work >.<
Yrom
09. Aug, 2008
This sounds REALLY GOOD, I just don’t know how to get it to work with After Effects, there is no plug-in file for after effects…
Text mit Volumen - digitalvideoschnitt.de - das Videoschnitt- und Camcorder-Forum
13. Aug, 2008
[...] Text mit Volumen Maltaannon hat hier eine Möglichkeit mit einem "besseren" bzw. fast richtigen 3D ganz innerhalb von after [...]
Sérgio - from Brazil
23. Aug, 2008
Hello Maltaannon, U rock. I have the same problem that “Pwnzoid” had. I just don´t get how can I to put de shapeexturder on EA CS3.
Thanxxxx !!!
Paul Yost
25. Aug, 2008
Oh my God!
Maltaannon – thank you for your work. Holy smokes. This plugin is Awesome3D!
Note: installing on Mac Leopard,
1) Save download link as… and put it in your Applications/AfterEffectsCE folder
….it wants to rename it to .dmg Choose use both (filename.polyCE.dmg)
2) Then rename the file to just .polyCE. Get rid of the .dmg extension
3) Have the Custom Effects Installer open
4) Drag the .polyCE file into the box on the Installer. Click install.
Fantastic. Thanks again.
Paul Yost
thais
08. Sep, 2008
Hi maltaannon…I try to instal this program clicking on “Download: ceShapeExtruder.polyCE (CS3 CustomEffect)” but open a window with scripts of error…whats going on??
Maltaannon
08. Sep, 2008
maybe you should try to right-click and save?
Tommy
11. Sep, 2008
Im having the same problem as thais, i tried right clicking and saving the file however it says it can only be saved as a .dms and it needs to be .polyce please help so that i don’t have to open cinema 4d and do it through that, this is so much easier.
Thanks for everything
Tommy
Maltaannon
11. Sep, 2008
Just download it as dms and rename. I don’t know what it’s doing that for you. Probably a Mac / Opera thing. Try Firefox or just download it in whatever format it will allow you to download and rename. I’ll work this out later on.
mihak
16. Sep, 2008
Hello.
Any idea why i dont get that “30 layers” effect when i look at the repeated layers? My extrusion simply goes flat no matter how much depth i apply. Also it looks pretty unrealistic when i change camera angles. From the side it looks a lot thiner than looking from almost straight up. Normal or am i doing something wrong?
Thanks
mihak
16. Sep, 2008
An addition to my previous post:
The illusion of depth is also affected by how far the camera is.
daevid
29. Sep, 2008
Mihak needs to read the rest of this thread, as I wish I had done before thinking this had solved all my problems. Arrgh! Still, it’s a beautiful expression, just can’t use it as the quick and easy fix to my current problem. Damn. Have to go back to 3D studio for this one.
Thanks, though. Awsome effect.
SmaL
11. Oct, 2008
Hi all, thx for your extruder plugin, I had a great time using it.I´ve also came to post because y want to share what I did with it.
I know that maybe it could have better image quality but you know how web 2.0 streaming works…anyway, the links:
http://www.vimeo.com/1929353
or
http://es.youtube.com/watch?v=1NDCa9Z6ToE
And again. Thx a lot!
Francesca Casiraghi
16. Oct, 2008
Hi, great tutorial!
i have a question: once i write a text and i apply the ShapeExtruder plugin (and cretate outlines, as shown in the tutorial) is it possible to edit/change it?
thank you very much!
Maltaannon
16. Oct, 2008
Unfortunately no. Outlines are a separate vector object that has nothing to do with the original text layer other than that it looks the same. Thats one of the two downsides to this technique. The other one is that the extrusion gets flat at extreme angles. Anyways I found it very useful and that’s why I published it.
Justin
24. Oct, 2008
Hi, I was just wondering if anybody has had any trouble downloading the actual file. When I click the link I just get a bunch of code or something. I’ve done everything I was supposed to do as downloading Air and changing permissions and all. Any help would be appreciated. Thanks!
Justin
24. Oct, 2008
I was able to download it in Firefox. Thanks!
dex
08. Nov, 2008
unable to install under vista, maybe it’s better to put the source file of the preset for download. AIR doesn’t work that well
Maltaannon
08. Nov, 2008
It does. Forgive me for saying that but you must be doing something wrong.
dex
11. Nov, 2008
the AIR doesn’t come across the privileges on vista, despite the fact that i changed them to allow for reading and writing.
luchshe preset davai otdelno, ili prishli mne ego po email
skitty
14. Nov, 2008
i tried using the 3dshapeextruder with this tutorial also but no effect, does not work at all, when i apply it, i see no extrusion, even tho i follow your tutorial step by step, i am using ae pro cs3
Stevem
17. Nov, 2008
I’m having difficulties using the installer. I never get the message,”installed successfully”? Is there a way to manually install?? Thanks
skitty
17. Nov, 2008
there is a link almost to the top of this page that says what customs effects are, click on it and there is a video there that shows u how to install it
Stevem
17. Nov, 2008
I watched the tutorial on how to install, downloaded adobe air and the installer. Everything seemed to download fine but when I actually try to install the preset it loads as if it’s installing but I never recieved the installation succfessfull message. when I open up AE, the preset is not listed? I was wondering if you could explain how to manually install without the installer? I’m running AECS3 on vista. Thanks!
Stevem
19. Nov, 2008
Can anyone explain how to manually install the preset without the installer?
dex
24. Nov, 2008
same here
CS3 and Vista
doesn’t install at all
Maltaannon
25. Nov, 2008
they do. you’re doing something wrong. check permissions in the Adobe folders on Vista.
dex
26. Nov, 2008
still no luck. even though the permissions are all off checked. why is it that difficult to have a install file without that AIR crap???
Maltaannon
26. Nov, 2008
because unAIRed files are no longer supported. Other people had some problems as well, but it was always their “fault” and they did fix it. Some solutions involved setting the Date and Time to the correct date (for some strange reason), others were based on setting the permissions. I really don’t know what to say to you. I have people buying my CE LightWrap, and they are not complaining. Everything is working, so my guess is (still) that it’s something on your end. Sorry.
Stevem
27. Nov, 2008
I’ve installed air, downloaded your installer and changed permission in adobe.. the installer opens, loads the file but as I said before, the installer looks as if it’s installing but the message saying installed successful never comes up and the files are not in the preset folder? I’ve installed presets manually can you not tell us how to manually install your presets? or is it not possible.. ?
dex
23. Dec, 2008
I even updated to a new AIR. and still the problems remains. Why it is that difficult to tell us how to install everything manually?
dex
26. Dec, 2008
Ok, found the solution on how to install the preset manually. thanks for all the good work. Merry X-mas
Paul C
12. Jan, 2009
hey, I think you have explained this already but I am confused as to how to install this preset on Mac. You mention a ZIP file which I can’t locate and when I try and use the Custom Effects installer it can’t seem to locate where AE is installed? Help? Please? Anyone?
rahul emmanuel
31. Jan, 2009
great like thet u work amazing!!!!!!!!!!!!
thanks relly needed it
rahul emmanuel
31. Jan, 2009
well dude your ceinstaller failes to find out the directory to adobe AE though give’s the right path how to instale please reply!!!!!!!!!!!!!!!
Aaliyah
08. Feb, 2009
Hi there, does this preset work on CS4, or is there a version that does? I downloaded it and i can see it in CS4 and it doesnt seem to work completely, it says: Missing: PS: 3DShapeExtruder
?
Thanx for your help
Daniel
10. Feb, 2009
Hi I cant install it and dont know what the problem is. I already install the adobe air but stills not workin
Nick
12. Feb, 2009
“If the preset says “Missing” when dropped don’t worry about it. It still works. The XML file is just for that (for hiding the “Missing” information).” – http://forums.creativecow.net/thread/2/918179
Nick
12. Feb, 2009
Now that I have answered one, I have one to replace it. The tutorial showed an example of the preset working from within a precomp. It was not described how it was precomposed but in the tutorial the precomp label was [TextAdvancedParented] The 3D switch and Collapse Transformation switche were not on, so I am assuming that something needs to be ‘parented’ in order for things to work. Just not sure what, or what I’m missing. Thought it might be a CS4 issue but have the same problem in CS3. Everything else works perfectly.
p.s. i am kind of amazed with your dedication, you have been answering questions in this page for like 2 years.
Maltaannon
12. Feb, 2009
I think I parented the camera from the child comp to the master comp. I don’t really remember. You can download the project file provided on this page to see how it was build. Hope you’ll like it. If you have any further questions that has been not answered in the comments please use my Skype Hotline – chatting is free. All the best and Happy AfterEffecting.
Andrea S
24. Feb, 2009
Maltaanon, thank you for simplifying the process of duplicating all those layers to make a 3D. Great plugin and great installation ease.
My one problem with the plugin is that when I extrude type (in this case Gotham font) and have a camera move in straight on it, I get a flicker on the extrusion from side to side. And I notice a moire in the fill when viewed from an angle.
If this sort of thing would happen using the other method, I would probably add a blur to the rear layers.
Is there a way to reduce flicker with yours?
March
03. Jul, 2009
Thanks for sharing your work.
I really appreciate that.
Greetings from Uruguay
(Sorry for my english)
jaime
24. Jul, 2009
Hi Maltaanon, nice tutorial. I have a question, how can you extrude a jpg. logo after you do auto-trace using same concept that you use in this tutorial.? After you do auto-trace generated masks instead the “contens” that are generated when it is from a text layer.
Thanks for your help..
Jaime
Jerzy Drozda Jr
24. Jul, 2009
http://www.youtube.com/watch?v=ycssZjT9o4U
http://maltaannon.com/articles/after-effects/studying-ce-shapeextruder/
VALE
21. Aug, 2009
HI MALATAANON I SAY SORRY FOR MY ENGLISH, BUT I’M NOT SO GOOD… I FOUND YOUR PAGE 4 ONE ERROR AND IT ‘S VERY INTERESTING..BUT ALL IN ENGLISH (OBVIUSLY)!!!BUT THE CUSTOM EFFECT ARE YOUR PLUG IN???WHAT’S THE SOFTWARE THAT I MUST INSTALL TO OPEN THEM??ARE CUSTOM EFFECT FREEWARE AND I CAN USE THEM 4 COMMERCIAL USE??TANK A LOT!!!!!!COOL ‘LL CAME BECK EARLY!!!!
Jerzy Drozda Jr
22. Aug, 2009
Some are free, some not. If you can download it on the tutorial page than it means it’s free. You don’t need to install anything. You can just copy the FFX file from the ZIP into your Presets folder. However it is recommended to use the CustomEffects Installer and use it to open polyCE file from the ZIP instead of FFX. All details are available here: maltaannon.com/what-customeffects-are/
SOSA
06. Sep, 2009
That is amazing!! I never thought it would be possible to do that without zaxwerks or boris fx!! nice job man!!!
aleks_suharev
15. Sep, 2009
hello with ukrainy, good lessons, for us such do not do
thecolt
18. Sep, 2009
Hey Maltannon this cool, but is there some way that you can make the extrusion come foward instead of always going away from you, as negative numbers don’t work, and moving the camera around to the back dosen’t work either, as i am wanting to parent the depth of the extrusion to “sound keys” generated data, and i need the front faces to come towards the screen rather than away? thanks for all your great advice on this site.
Jerzy Drozda Jr
18. Sep, 2009
Have you tried using the Offset parameter in the ShapeExtruder?
Mihaela M
06. Nov, 2009
Jerzy, you are “awsome”. Not only super-smart, but bloody funny. Are you maried, btw?
Issue: I installed your plug-in (thank you again) on my CS4 Vista 64 machine and it works. In my new CS4 the “Create Outlines” has been replaced by “Create Shapes From Text” which does something similar to what you got, but if I move the camera on the sides, the extrusion is flatting and get flat 2D text when I am right on top or sides. Do you know why?
Best to you from California
Mihaela M
07. Nov, 2009
OK…I saw the other video about The ShapeExtruder, so…you don’t have to answer anymore…..to my second question.
However, you’re good.
Thank you.
Jerzy Drozda Jr
07. Nov, 2009
Glad you got it figured out. As for your first question… that depends. Got pics? ;)
Valentina
01. Dec, 2009
If the camera has left or right view the text becomes a line and no more extrusion. In other words I can not orbit the camera around the text. I am using Mac CS3.
Am I doing something wrong?
Thanks,
Jerzy Drozda Jr
01. Dec, 2009
This is how this effect works. Limitations of 2.5 D app. If you want full extrusion you need to dive into some plugins like Zaxwerks ProAnimator, or go with a real 3D application.
David Byrne
01. Dec, 2009
I literally cannot believe some of the responses on here. So a guy goes out of his way to make a FREE product, provide a FREE tutorial and FREE support through this comments section and some of you are bitching and moaning about the length of the tutorials??? Get over yourselves.
Firstly- I like these tutorials, as I do Andrew Kramer, Harry Frank, John Dickinson and Aharon Rabinowitz. Everyone has their own style and I like them all for different reasons.
Secondly – frankly, if you’re some sort of After Effects expert who could understand this all in ‘2 minutes’ as mentioned above, why the hell are you trawling the net for tutorials? In fact, why not set up your own goddammed website, and provide free tutorials & presets. And when doing the tutorials, if you wouldn’t mind doing them in a foreign language, that’d be dandy. Then when some troll posts a snot-nosed ungrateful response like you did, you’ll understand my point.
Finally, if your attitude is half as bad in the real world as displayed here, when you interact with actual people rather than from behind the safety of your keyboard, good luck in this industry. You’ll need it. People work with people they can get along with, not rude insufferable arrogant little turds with a God-complex who feel the need to belittle everyone else’s work in order to make their own pathetic contributions seem worthwhile.
Maltaannon, great work fella. Appreciated by the vast majority of us. Cheers.
kunal
06. Dec, 2009
sirrrrr,
aI m student …lerning compositing in star multimedia(kolkata-WestBengal-INDIA)…iam stay ding in ae7 is it possible …..in ae 7 ???? please help …….
and billlion thanks …..for ur invention……please sorry for my (bad ) eng…….
at last……………………………….u r great…
Jerzy Drozda Jr
07. Dec, 2009
Sorry. This is based on AE CS3 features, so it will not work in any previous version.
kunal
11. Dec, 2009
are it work in ae cs 4 ?????
Ofer
22. Dec, 2009
Hi. Thanks for the great preset. Unfortunately, it won’t install. When the installer asks where I my AE is installed, I direct it to the correct directory and nothing happens. When I direct it to any other directory it says the installation failed.
Any ideas?? :(
Thanks again
SPecialEFX
10. Feb, 2010
is it work on CS4???
I download Extruder but it doesn’t work on C4
or explain how
Jerzy Drozda Jr
10. Feb, 2010
It does work with CS4 just as it does in CS3. You must be doing something wrong.
d
12. Feb, 2010
you guys are probably the most annoying tutorial making nerds out there. BUT, good job and respect.
B. Austin
17. Feb, 2010
Wow, what an awesome preset! Your in-depth tutorial is much appreciated as well.
M.Ali
03. Mar, 2010
plug_in Missed But preset Show In My After Effect tel Me What`s Problem.
Jerzy Drozda Jr
03. Mar, 2010
Theres no problem. You installed it in a wrong way, but it will still work, even when it says “Missing”. Just do as I do in the tutorial and you’ll see that it works just fine.